Built For Comfort Crafted For Endurance

Industrial Van Base Specs

Chassis

The Chassis Is The Backbone Of The Unit, Supported With Gusseted Wall Framing. The Two Combined Ensure A Strong Robust Mobile Unit For Many Years Of Service.

All Welds Are Carried Out With A Mig Welder, All Welds And Bare Steel Are Primed And Gloss Coated With Black Enamel Paint

  • Drawbar - Galvanised or Painted
  • Chassis - Galvanised or Painted
  • Tow connection:
    • Ball coupling 50mm
    • Ball coupling 70mm
    • Fixed Ring Coupling
  • Axles:
    • 45mm Square with Parallel Bearings 1600kg
    • 50mm Square with 2 Ton Bearings 2000kg
  • Suspension:
    • Tandem-Axle 60mm 4 Ton Roller Rocker
    • Tri-Axle 60mm 4.5 Ton Roller Rocker
  • Brake:
    • 10” Electric
    • 12” Electric
    • Electric Brake Away System
  • Wheels/Tyres:
    • Low Profile Landcruiser 205/65R15 - 6 x Stud Steel
    • Low Profile Landcruiser 7.50R16 - 6 x Stud Steel
  • HD Jack Stand 1200kg rated
  • Stabiliser Legs:
    • HD Wind Down Corner Steadies
    • HD Fold Down Corner Steadies
  • Traymark HD Non-Slip Galvanised Steps

Internal Fit-Out

  • 17mm Marine Grade Ply, Glued and Screwed To Floor Joist
  • Commercial Vinyl Flooring
  • Benchtops & Tables 16mm Ply, With Laminated Plastic Edge Strip
  • All Drawers Have Positive Locking Systems
  • Bench Seating, With Lift Up Cushions
  • Fire Extinguisher

External Fit-Out

  • 50mm Insulated Roof
  • 25mm Insulated Walls
  • .4mm Colourbond Sheeting, Fixed With Sika-Flex & Riveted
  • Roof Is Pitched, To Allow Run-Off When In Level Position
  • External Door 700x2000mm Steel Fame/ Steel Clad
  • Windows:
    • Sliding Square Corner Windows 570x1180
    • Single Hopper Wind Out Windows
    • Sliding Windows Are Aluminium Framed, Lockable And Flyscreened With Crim Safe

12v Trailer Lighting

  • All 12V / 24V Traffic Wiring and Components As Per Australian Design Rules (ADR)

240 Volt Electrical

All Electrical Wiring As Per Australian Standard - AS3001, Carried Out And Tested By Licensed
Contractors.

  • All circuits are RCBO Protected
  • All Electrical Components Are Double Pole
  • 15 Amp Inlets
  • Clearly labelled switchboard

Plumbing

  • Kitchen:
    • Stainless Steel Sink
    • Stainless Steel Flick Mixer
    • Hand Pump
  • Shower:
    • 900 x 760mm Fibreglass
  • Toilet:
    • Thetford Cassette Toilet - 17L Holding Tank
    • Merlin MFT3 Fibreglass Hand Pump - 180L Waste Tank
    • Merlin Fibreglass Foot Pump - 180L Waste Tank
    • 12V Hatch In Toilets
  • Hot Water:
    • Nautilus On Demand Gas Hot Water
    • Rheem 25L 2.4kw Electric Hot Water
  • Water Pump:
    • SeaFlo 21 Series Freshwater Pump 12V 3.8LPM
    • ShurFlo STD Pump 12V 11.3LPM
    • Fresh Water tank: 82 or 200L Polyurethane
    • Waste Water Tank: 82 or 200L Polyurethane

Appliances

  • Air Conditioner:
    • Fresh Jet Series 7 Pro Reverse Cycle with Remote
    • 2.5kw Mitsubishi Split System Reverse Cycle with Remote
  • Fridge:
    • Hisense 45L Bar Fridge 240 Volt
    • Hisense 125L Bar Fridge 240 Volt
    • Dometic 145L 12/240 Volt
  • Microwave 240 Volt
  • Kettle 240 Volt
  • Toaster 240 Volt

Solar & Battery Backup

  • Traymark offers an extensive range of solar-powered options, including the trusted brands of Victron and Enerdrive.
  • Deep cycle batteries range from 12-48V and can be gel or Lithium, depending on weight requirements.
  • Lithium batteries have a built-in battery management system to prevent overheating, solar panel systems scale from 1 panel right up to 8 panels, giving a power range of 180W -3.3KW.
  • Panels are mounted to the roof, with no setting up required.
  • High quality solar controllers used in all applications, giving the most efficient battery charging capabilities in all conditions.
  • Inverters are used to supply 240V to appliances in fully offgrid applications.
  • Manual or auto start generators can be utilised to supply backup 240v power and automatically top up batteries when needed.

Name: